product description

CYS series of high-performance oil-water separator, is a new generation of compressed air purification (gas-water separation filter) device. With good technical performance and a wide range of applicability can be installed in the compressor, after the cooler, refrigerated dryers, adsorption dryer before, or general industrial gas on the main road, the compressed air pollutants (oil , Water, dust) for effective separation and filtration. The treated compressed air can be substantially free of oil, water and micron-sized solid particles.

working principle

CYS series of highly efficient oil-water separator mainly by the container components, spiral separator (water separation components), filter components, sewage system (not shown), instrumentation and other components. Compressed air containing large amounts of oil, water and solid particles is accelerated to the helical path of the helical separator after being accelerated and re-entrained to remove most of the droplets and larger particles by centrifugation. The compressed compressed air is subjected to pre- Of the barrier can only enter the spiral separator cavity, from outside to inside through the cylindrical filter. In the combination filter bed of direct interception, inertial collision, gravity sedimentation filtration mechanism under the combined effect of further trapping of small mist particles, and to promote the process of passing through the filter bed, resulting in cohesion, and finally in the inner layer of a gravity settlement layer To achieve gas-liquid separation. The separated droplets fall into the filter element and are led out through the spiral catheter.

The series of products because of the rational set of two purification components, and the use of cohesive filtration mechanism, and thus a high degree of purification, resistance loss is small, filter dust holding capacity, long life, the overall compact structure, easy operation and maintenance.

Technical indicators

Working pressure: 0.6-1.0Mpa (according to the requirements can provide 1.0-3.0Mpa)

Intake temperature: ≤ 50 ℃

Gas-liquid separation efficiency:> 98%

Pressure loss: ≤ 0.02Mpa